Based on technology in the market, winning trust with service. 'Together through storm and stress, win-win cooperation' is our company's principle of providing long-term technical support services
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings - HMI properties, change to your current screen model;
4. If the resolution changes when replacing the model, a prompt window will pop up. Check all four options to confirm, and the resolution will be adjusted automatically.
Note: The project file can only be converted from EB8000 to EBPro, not vice versa.
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings - HMI properties, and change it to your current screen model;
4. If the resolution changes when changing models, a prompt window will pop up. Check all four options to confirm, and the resolution will be automatically adjusted.
Note: The project file can only be converted from EB8000 to EBPro, not the other way around.
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings-HMI properties, and change it to your current screen model;
4. If the resolution of the replacement model changes, a prompt window will pop up. Check all four options to automatically adjust the resolution.
Note: Project files can only be converted from EB8000 to EBPro, not the other way around.
1. Compile the EB8000 program to generate an xob file;
2. In the EBPro software, decompile this xob file to generate an emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings—HMI properties, and change it to your current screen model;
4. If the resolution changes when changing models, a prompt window will pop up. Check all four options and confirm, and the resolution will be automatically adjusted.
Note: Project files can only be converted from EB8000 to EBPro, not the other way around.
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings-HMI properties, and change it to your current screen model;
4. If the resolution changes when changing models, a prompt window will pop up. Check all four options to confirm, and the resolution will be automatically adjusted.
Note: Project files can only be converted from EB8000 to EBPro, not the other way around.
1. Compile the EB8000 program to generate an xob file;
2. In EBPro software, decompile this xob file to generate an emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings - HMI properties, and change it to your current screen model;
4. If the resolution changes when changing models, a prompt window will pop up. Check all four options to confirm, and the resolution will be automatically adjusted.
Note: Project files can only be converted from EB8000 to EBPro, not the other way around.
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings - HMI properties, and change it to your current screen model;
4. If the resolution changes when replacing the model, a prompt window will pop up. Check all four options to confirm, and the resolution will be adjusted automatically.
Note: The project file can only be converted from EB8000 to EBPro, not the other way around.
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings—HMI properties, and change it to your current screen model;
4. If the resolution changes after changing the model, a prompt window will pop up. Check all four options to confirm, and the resolution will be automatically adjusted.
Note: The project file can only be converted from EB8000 to EBPro, not vice versa.
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings—HMI properties, and change it to your current screen model;
4. If the resolution changes when changing models, a prompt window will pop up. Check all four options to confirm, and the resolution will be adjusted automatically.
Note: Project files can only be converted from EB8000 to EBPro, reverse conversion is not supported.
1. Compile the EB8000 program to generate xob file;
2. In EBPro software, decompile this xob file to generate emtp file;
3. Finally, open the emtp file through EBPro software, enter system parameter settings - HMI properties, and change it to your current screen model;
4. If the resolution changes when changing models, a prompt window will pop up. Check all four options to confirm, and the resolution will be adjusted automatically.
Note: Project files can only be converted from EB8000 to EBPro, not the other way around.
The company adheres to the business philosophy of integrity first and quality first, and will integrate the spirit of dedication, professionalism and focus into every detail of customer service
